Install the ball valve: The next step is to attach the 1/2″ ball valve to the steel nipple.Make sure you apply some plumber’s tape (also known as Teflon tape) to the threads of the nipple before you screw it in to ensure a tight seal. Set up the steel nipple: At the other end of the compression hose, you’ll need to connect the 1/2″ steel nipple.Add the compression hose: Now, attach the 20″ long 1/2″ FIP compression hose to the remaining outlet on the three-way adapter.Make sure it’s secure but avoid over-tightening. Reattach the water line: Once the adapter is in place, reconnect the sink’s water line to one of the adapter’s outlets.Instead, double-check to ensure the threads align properly. It should go on smoothly, but if you’re facing any resistance, don’t force it. Attach the three-way adapter: Once you’ve detached the water line, screw on the 3/8″ three-way compression adapter onto the cold water source.You might want to have your pail and rag handy for any residual water that might escape. Use your adjustable wrench to turn the nut counterclockwise to loosen it. Detach the water line: After ensuring the water supply is off, disconnect the cold water supply line from the sink.If you’ve got the right supply, no water should come out while the hot water is still running. Turn off the water source: Now, ensure you’re working with the cold water supply by running cold water from your faucet.This will catch any leaking water that has already entered the line. Prepare your workspace: Start by placing a pail under the cold water source of your sink, which is usually on the right-hand side.We’re all set now! Let’s dive into the step-by-step guide to install a hose spigot under your kitchen sink. We’re not only changing the size (from 3/8″ to 3/4″), but we’re also altering the type of threading from compression to pipe. That’s why all of the adapters and fittings mentioned above are necessary. If you try to do so, it will leak, no matter how much Teflon tape you use. Compression threading cannot be attached to pipe threading. A Pail and Rag Understanding Compression versus Pipe Threadīefore we proceed with the installation, it’s vital to understand that we’ll be transitioning from compression threading from the water supply to pipe threading that your garden hose will connect to.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |